RG-009
Jvan Pack
Availability: | |
---|---|
Quantity: | |
Voltage | 110-220V 50/60Hz |
Power | 2600W |
Air Pressure | 0.6-0.8Mpa |
Air Consumption | 0.35m3/min |
Filling Volume | A: 6-60ml B: 10-120ml C: 25-250ml D: 50-500ml |
Filling Accuracy | ±1% (Based on 500ml water) |
Capacity | 20-28Pcs/Min |
Sealing Diameter | 16-50mm(Can be customized) |
Tube Height | 70-210mm |
Machine Size | 1610*1420*1650mm |
Machine Weight | 450Kg |
Workshop Photos:
![]() | ![]() | ![]() |
Voltage | 110-220V 50/60Hz |
Power | 2600W |
Air Pressure | 0.6-0.8Mpa |
Air Consumption | 0.35m3/min |
Filling Volume | A: 6-60ml B: 10-120ml C: 25-250ml D: 50-500ml |
Filling Accuracy | ±1% (Based on 500ml water) |
Capacity | 20-28Pcs/Min |
Sealing Diameter | 16-50mm(Can be customized) |
Tube Height | 70-210mm |
Machine Size | 1610*1420*1650mm |
Machine Weight | 450Kg |
Workshop Photos:
![]() | ![]() | ![]() |
1. Adopts ultrasonic sealing technology, no need warm up time, more stable and neat sealing, no distortion and low reject rate less than 1%.
2. Machine could automaically finish tube feeding, registration mark identifiying, filling, sealing with coding, end trimming, tube out feeding, fully automatic to save labor cost and lower production cost.
3. Independent R&D for digital ultrasonic automatic tracking electrical control box, no need manual adjust the frequency, with power auto compensation function, avoiding the reduction of power after long time use. Could freely adjust the power based on tube material and size, stable and minimum the fault rate, extend the life span than the normal electrical box.
4. PLC with touch screen control system with arlarm system, could directly view the alarm information on the touch screen, can locate the problem and solve it immediately.
5. No tube, no filling and not tube no sealing function, reducing the machine and the mould loss.
6.Adoptes Anti-dripping filling nozzle. Made of 304 stainless steel, acid and alkali resistance, corrosion resistance.
1. Adopts ultrasonic sealing technology, no need warm up time, more stable and neat sealing, no distortion and low reject rate less than 1%.
2. Machine could automaically finish tube feeding, registration mark identifiying, filling, sealing with coding, end trimming, tube out feeding, fully automatic to save labor cost and lower production cost.
3. Independent R&D for digital ultrasonic automatic tracking electrical control box, no need manual adjust the frequency, with power auto compensation function, avoiding the reduction of power after long time use. Could freely adjust the power based on tube material and size, stable and minimum the fault rate, extend the life span than the normal electrical box.
4. PLC with touch screen control system with arlarm system, could directly view the alarm information on the touch screen, can locate the problem and solve it immediately.
5. No tube, no filling and not tube no sealing function, reducing the machine and the mould loss.
6.Adoptes Anti-dripping filling nozzle. Made of 304 stainless steel, acid and alkali resistance, corrosion resistance.
Feeding Part
>Auto feed the tubes.
Automatic Tube Turnover
>Turnover the tube to the mould automatically.
Sensor
>Auto align color code.
Mould
>Customized as per samples.
Mould
>Customized as per samples.
End Trimming
>Cut excess waste, make the product neat.
Sensor
>Tube positioning.
Inner Parts
>High quality parts make machine stable.
WORKSHOP PHOTO
Feeding Part
>Auto feed the tubes.
Automatic Tube Turnover
>Turnover the tube to the mould automatically.
Sensor
>Auto align color code.
Mould
>Customized as per samples.
Mould
>Customized as per samples.
End Trimming
>Cut excess waste, make the product neat.
Sensor
>Tube positioning.
Inner Parts
>High quality parts make machine stable.
WORKSHOP PHOTO
Widely used for food, pharmaceutical, cosmetics, chemical and other plastic, PE, aluminum laminated tube filling and sealing.
Widely used for food, pharmaceutical, cosmetics, chemical and other plastic, PE, aluminum laminated tube filling and sealing.